Reference: HUHLU-H32-20L
Hydraulic oil can for V32 engine (20L)
20L can for HP circuit on compatible for Husmann slow shredders any type of 22 L.
Reference: DOAK00PE04
Adaptable service plate for DOPPSTATD AK series shredders
Adaptable maintenance plate for Doppstatd type high-speed shredders. Dimension: 1750 x 90 x 20mm...
Reference: DUHD1000S001
Hammer holder for Duratech HD10 grinders
Fixed hammer support body adaptable to Duratech HD10 fast shredder holders. With two threads for...
Reference: WISR00R02
Willibald SR adaptable rotor tool scraper
Vercom Parts scraper adaptable to Willibald SR for right and left side installation of the...
Reference: OUTB00CC
Adaptable counter cutting bar for Komptech Crambo shredders
Vercom Parts counter cut bar adaptable to Komptech Crambo slow grinders. 4 reinforced steel tips....
Reference: WIMZA00A001
Adaptable 35/1450 mm shaft for Willibald high-speed...
Vercom-Parts treated steel shaft adaptable to Willibald high-speed shredders. Dimensions: 35/1450 mm
Reference: OUT00DFBR
Tungsten carbide adaptable fixed tooth for Komtech Crambo...
Vercom Parts fixed tooth in Hardox adaptable to Komptech - Crambo slow grinders. Bio refilled...
Reference: OUT00DFB
Fixed tine for Komptech Crambo slow shredders
Vercom Parts fixed tooth adaptable to Komptech Crambo slow grinders in Hardox 450.
Reference: DODW00P010
Armoured triangular threw for slow grinders
Vercom-Parts fixed triangular tine counter suitable for Doppstatd type slow shredders. 20kg...
Reference: DOAK00G250
Complete grid for fast grinders in Hardox 500
Complete Vercom Parts 250 mm grille adaptable Doppstadt AK series. Size: 1245 x 1765 cm Thickness...
Reference: HUHLU-H32
V32 hydraulic oil drum for HL (208L drum)
Vercom Parts 208 L hydraulic oil drum for HP circuit on Husmann mill all types (HL2, HFG5 etc ...).
Reference: KOCR13G180
Hardox 400 grate adaptable for Komptech Crambo slow...
Hardox 400 Vercom Parts grid adaptable to Komptech slow shredders - Crambo 180 mm mesh Thickness...
Reference: DOAK00PE01
Adaptable maintenance plate for Doppstatd AK430 shredders
Vercom-Parts HARDOX 450 maintenance plate suitable for Doppstatd high-speed shredders....
Reference: KOCR12BSR01
Rotor belt with steel structure for Komptech Crambo...
Carpet with Vercom Parts steel structure adaptable to Komptech-Crambo slow grinders. Dimensions:...
Reference: DOAK00A01
Adaptable hammer pins for DOPPSTATD high-speed mills
Vercom Parts Adaptable Doppstatd Hammer Shafts Types. Dimensions: 1730 x 50 x M22 x 1.5 mm. For...
Reference: DOAK00C01
Adaptable standard clamping wedge for fast grinders
Vercom-Parts reinforced steel clamping block suitable for Doppstadt series light shredders....
Reference: DOAK00O011
Carbide chip shielded hammer for fast mills
Vercom Parts hammer shielded with tungsten carbide chips for wood treatment adaptable to...
Reference: doak00O0TB
Adaptable rear grate cover type Doppstatd rapid shredders
Rear grate cover adaptable to Doppstatd type shredders fast series. Dimensions: 1750 x 1260 mm....
Reference: JEAZ00S003
Adaptable hammer and blade holder for Jenz grinders
Oscillating body hammer support & blade adaptable on Jenz grinders. Axis: 35mm. With ring and...
Reference: HV100
Reducer oil and angle return for slow mills (20L can)
Reducer oil and angle return for Husmann HF type grinders (20L can)
Reference: DOAK00OBEAK600
Doppstatd AK600 adaptable scraper floor strip
Vercom-Parts reinforced steel scraper bar adaptable to Doppstatd type slow shredders. Dimensions:...
Reference: TEU03O02
Pregrinder tooth for slow mills Teuton
Vercom Parts tools adaptable to Teutonic slow grinders. Accessory ideally suited for stumps and...
Reference: KOTE00P001
Adaptable blade for Komptech Terminator XF shredders
Promotion Vercom Parts counter-comb adaptable to Komptech slow shredders - Crambo Terminator XF...
Reference: DOAK12BM01
Carpet with metal structure for adaptable rear conveyor...
Vercom Parts Rear Metal Mat Adaptable Doppstatd Fast Crush Types. Dimensions: 8410 x 1800mm
Reference: QUAD03O002
Adaptable curved tooth for Quadco slaughter heads
Vercom Parts curved square knife adaptable to Quadco slaughter heads. 58.90 mm wide. 46.74 mm...
Reference: DOAK03C04
Wide clamping wedge adaptable for Doppstadt type...
Vercom-Parts tool adaptable to Doppstatd high-speed shredders Tapping: 1 Weight: 1.18 Kg
Reference: 5400168
Round mesh grid adaptable to Haybuster H835 shredders
Vercom Parts mesh grid adaptable to Haybuster H835 straw grinders. Several diameters are...
Reference: WISHA10R04
Adaptable side scraper for Willibald Shark quick shredders
Vercom Parts side scraper adaptable to Willibald Shark shredders. Dimension: 305 x 100 x 20 mm...
Reference: DOAK00TC001
Hardox 450 sky sheet adaptable to fast shredders...
Vercom-Parts sky sheet adaptable to Doppstatd type high-speed shredders. Made of Hardox 450...
Reference: GIL03O001
Adaptable fixed tooth for GILBERT harvester head
Adaptable Vercom Parts fixed tool for Gilbert harvester head. A tapping 5/8"-18 For reference...
Reference: QUAD03O001
Adaptable curved knife/tooth QUADCO slaughter head
Adaptable Vercom Parts knife/tooth for Quadco slaughter head. 51.23 mm wide. 39.60 mm high.
Reference: QUAD06O004
Adaptable curved square knife for Quadco slaughter head
Adaptable curved square knife for Quadco grinder. 56.63 x 56.63 mm Tapping 1/2"-20
Reference: JEAZ03C04
Blocking wedge with reloading adaptable to Jenz fast...
Cale Vercom Parts adaptable to Jenz fast shredders. Weight : 1.60 kg
Reference: WISHA10R03
Adaptable central scraper for Willibald Shark rapid...
Vercom Parts central scraper adaptable to Willibald Shark series shredders. Dimensions: 425 x 100...
Reference: DOAK00PE02
HARDOX 450 service plate adaptable for Doppstatd type...
Vercom Parts maintenance plate adaptable to Doppstatd fast shredder types. Dimension: 1750 x 90 x...
Reference: doak11ba01
Carpet with metal structure for rear conveyor AK 430 of...
Carpet with metal structure of 8410 x 1750mm.
Reference: JEAZ03C01
Adaptable wedge for Jenz fast grinders
Adaptable wedge for Jenz shredders Two ø35 drills. Weight : 1.6 kg
Reference: DOAK00O0TF
HARDOX 450 bottom plate adaptable to Doppstatd type...
Vercom-Parts 450 abrasion resistant steel bottom plate adaptable to Doppstatd fast shredder type....
Reference: DODW113060AR
Doppstatd DW3060 Adaptable Rear Reject Mat
DW3060 11.200 x 1200mm endless +T30/10 +T20/10 Hot junction. Cleat T30/10 S B. Spacing between...
Reference: DOAK00S01
Adaptable hammer body for fast grinders
Adaptable tool Vercom Parts for fast shredders Doppstadt AK. One side sharp and the other covered...
Reference: DODW112560SR
Adaptable reinforced sub-rotor belts type Doppstatd...
Reinforced rotor mat (metal structure) 500/3+1ST 5+2, 7450 x 1000 mm Profile G85-L17 with...
Reference: DOAK03O050
Adaptable 5-point hammer for light grinders
Vercom Parts fixed tool adaptable for lightweight shredder Doppstadt AK series Five tungsten...
Reference: KOCR11BA01
Rear mat adaptable to Komptech Crambo shredders
Back mat for Komptech Crambo shredder. 11,320 x 1,000 mm. Rafters of 750 mm width.
Reference: OUTG03
Bare tooth adaptable to Komptech Crambo slow grinders
Tooth/sickle vercom parts adaptable to Komptech Crambo slow grinders. Weight: 1.72 kg. Available...
Reference: DOAK03O055
5-point shielded hammer for high-speed grinders
Vercom Parts fixed tool adaptable for Doppstadt AK series shredder. Five tungsten carbide tips...
Reference: OUTRECD06T
Hardfacing tooth adaptable to Komptech-Crambo slow grinders
Vercom Parts sickle/tooth recharged on the head adaptable to Komptech Crambo slow grinders....
Reference: HU00O030
Adaptable four-point hammer for quick grinders
Vercom Parts fixed tools adaptable for Husmann HFG5 series fast shredders. Four tungsten carbide...
Reference: OUTL03
Adaptable tooth for slow grinders Komptech - Crambo
Vercom Parts tooth/sickle adaptable to Komptech - Crambo slow grinders. Weight : 1.80 kg...
Reference: JEAZ03L002
Blade with reloading for Jenz fast shredders
Adaptable blade for Jenz mill with tungsten carbide chip coating. Dimensions: 100 x 70 x 12 mm....
Reference: HUFG03O005
Adaptable three-point tungsten carbide hammer for fast mills
Adaptable Vercom Parts fixed tool for Husmann FG series fast mills Three tungsten carbide tips...
Reference: JEHEV7004L03
Blade for adaptable fast shredders Jenz HEM 700
Vercom Parts blade adaptable to Jenz HEM 700 shredder. Dimensions: 108 x 60 x 7 mm Weight : 0.32 kg
Reference: JEAZ00O030
Adaptable five-point carbide hammer for fast mills
Adaptable Vercom Parts fixed tool for Jenz fast grinders. Five carbide tips for green waste. A...
Reference: NIC03O001
Adaptable hammer one tip with reinforcement pads for fast...
Adaptable Vercom Parts oscillating tool for Nicolas fast grinders. A tungsten carbide tip for...
Reference: TI365200O020
Adaptable hammer two tips in Hardox 400 for fast grinders
Vercom Parts hammer adaptable to TIM fast shredders 2 tips. 4 tungsten carbide inserts. In HARDOX...
Reference: OUT00DFBR
Refill sickle adaptable for slow grinders Komptech-Crambo
Bio fixed tooth for slow grinders Komptech-Crambo refilled with tungsten carbide chips adaptable...
Reference: OUT00DFB
Fixed tooth adaptable to Komptech-Crambo grinders
Fixed tooth adaptable in Hardox 450, adaptable to Komptech-Crambo grinder. Weight : 2.29 kg
Reference: DODH04S01
Adaptable blade holder for Doppstatd shredders
Vercom Parts Adaptable Blade Stand Shredders Type Doppstatd. Dimension: 220 x 230 x 101mm
Reference: WIMZA03M1400P
Fixed hammer with carbide plate for fast mills
Vercom Parts fixed tool adaptable for Willibald fast shredders, MZA 1400 A carbide plate An M20...
Reference: WISR03O010
Adaptable lower hammer two tips for quick grinders
Vercom Parts lower tool in reinforced steel with two tungsten carbide tips adaptable to Willibald...
Reference: OUTG06
Reversible adaptable hammer for slow grinders Komptech -...
Reversible Adaptable Vercom Parts Tool for Komptech Slow Mills - Crambo Available in right &...
Reference: WISR00O055
Screw hammer on support for fast grinders
Vercom Parts screw tool adaptable on Willibald SR series support. Top tool: 3 carbide tips...
Reference: HUHL03O001
Adaptable hammer with reinforcements for slow mills
Adaptable Vercom Parts hammer in reinforced steel with reinforcements for Husmann HL series slow...
Reinforced swinghammers adaptable to Haybuster H1030...
Set of 44 oscillating hammers Vercom Parts adaptable HAYBUSTER H1030. With 4 reinforcements on...
Reference: DOAK03O010
Adaptable single-point hammer type Doppstatd high-speed...
Vercom Parts Adaptable Doppstadt Fast Mill Types. 1 Tungsten carbide tip Weight: 2.25 Kg
Reference: JEAZ06M12
Adaptable floating hammer for Jenz fast shredders
Adaptable vercom parts oscillating tool for Jenz refiner series AZ60, AZ65, AZ960 and other...
Reference: JEAZ00O040
Refilled hammer adaptable to Jenz fast shredders
Adaptable fixed tool for Jenz shredder. With carbide chip refilling. A hole Ø 20 mm. Weight :...
Reference: WIMZA00M010
Adaptable tungsten chip shielded oscillating hammer...
Vercom Parts oscillating tool adaptable to Willibald MZA shredders. Model with carbide chip...
Reference: TI365200O010
Adaptable armoured fixed hammer for TIM fast shredders
Adaptable Vercom Parts fixed tool for TIM shredders. Carbide chip shielding. Two M20 taps for...
Reference: JEAZ08O020
Four-point hammer for Jenz series AZ fast grinders
Fixed hammer adaptable for Jenz series AZ shredder. Four tungsten carbide tips for green waste. A...
Reference: JEAZ06O040
Fixed reloaded adaptable hammer for Jenz high-speed...
Vercom Parts fixed tool adaptable to Jenz shredders. A hole Ø 20 mm. Reloading to the copals on...
Reference: DOAK00O011
Adaptable tungsten carbide shielded hammer for Doppstatd...
Tungsten carbide chip shielded hammer for wood processing. Weight : 3.45 kg