Reference: FAES03O031
Reinforced hammer for FAE mills type STC/FP
Fixed tool vercom parts adaptable on FAE shredders type STC / FP. Two large carbide tips + a...
Reference: FAE03O065
Adaptable FAE Type B Hammer
Vercom Parts fixed tool adaptable for FAE type B mill with a carbide tip for wood. A tip. An M16...
Reference: FAE03O060
Square-tipped hammer for FAE type A stone mills
Vercom Parts adaptable fixed tool for FAE type A grinder. A big square point for stone. Two M16...
Reference: FAE03O080
Hammer with a large point adaptable to FAE type G forest...
Vercom Parts fixed tool adaptable for forestry shredder FAE type G. A big tungsten carbide tip....
Reference: FAE03O092
Fixed hammer with an adaptable tip for FAE type F forest...
Fixed tool Vercom parts adaptable for forest shredders FAE type F. With a tungsten carbide tip....
Reference: PL50000O001
Adaptable hammer two tips for green waste
Vercom Parts fixed tool adaptable for Plaisance 500 series shredder With two tungsten carbide...
Reference: PL70003O001
Hammer fixes a tip for forest shredders
Vercom Parts fixed tool adaptable for Plaisance 700 series shredder. A tungsten carbide tip for...
Reference: HUFG03O005
Adaptable three-point tungsten carbide hammer for fast mills
Adaptable Vercom Parts fixed tool for Husmann FG series fast mills Three tungsten carbide tips...
Reference: FAE03O06
Reinforced adaptable hammer for FAE type A mill
Adaptable Vercom Parts fixed tool for FAE type A shredders. A carbide tip. Below three...
Reference: WISHA03O0302
Hammer fixes two tips with reinforcement pads for fast...
Vercom Parts fixed hammer adaptable to Willibald Shark series fast mills. Two tungsten carbide...
Reference: PL70003O020
Single-point hammer for Plaisance 700 series forestry...
Adaptable fixed tool for Plaisance 700 series shredder. A big tip of tungsten carbide. Two M16...
Reference: SE06O050
Two-point hammer adaptable to Seppi shredders
Adaptable Vercom Parts fixed tool for Seppi grinders. Two tungsten carbide tips for green waste....
Reference: FAE06O091R
Fixed hammer with adaptable hardfacing for FAE type A...
Adaptable fixed tool for FAE type A mill. A tungsten carbide tip, with carbide chip refilling....
Reference: FAES03O040
Adaptable reinforced four-point hammer for FAE STC-FP...
Adaptable fixed tool for FAE shredder type STC-FP. Four large carbide tips + two tungsten...
Reference: PL70003O04
Adaptable hammer for Pleasure Grinder 700 series
Adaptable tools for Plaisance 700 series forest shredder. An inserted tungsten carbide tip for...
Reference: FAO2
Two-point hammers for FAR CAM mills
Fao Far tools two tips. M16 tapping. BTR screw. No end of 1.5.
FAE Adaptable Hammer Type B3/ HD MIXED
FAE type B3/ HD MIXED adaptable hammer. 1 square tips. 1 M24 thread.