Reference: DOAK00G250
Complete grid for fast grinders in Hardox 500
Complete Vercom Parts 250 mm grille adaptable Doppstadt AK series. Size: 1245 x 1765 cm Thickness...
Reference: DOAK00C01
Adaptable standard clamping wedge for fast grinders
Vercom-Parts reinforced steel clamping block suitable for Doppstadt series light shredders....
Reference: WIMZA00A001
Adaptable 35/1450 mm shaft for Willibald high-speed...
Vercom-Parts treated steel shaft adaptable to Willibald high-speed shredders. Dimensions: 35/1450 mm
Reference: DOAK00A01
Adaptable hammer pins for DOPPSTATD high-speed mills
Vercom Parts Adaptable Doppstatd Hammer Shafts Types. Dimensions: 1730 x 50 x M22 x 1.5 mm. For...
Reference: DOAK12BA01
Carpet with metal structure for rear conveyor 430 x 8410...
Vercom Parts rear mat adaptable to Doppstadt AK series fast shredders. Dimensions: 430 x 8410 x...
Reference: DOAK12BM01
Carpet with metal structure for adaptable rear conveyor...
Vercom Parts Rear Metal Mat Adaptable Doppstatd Fast Crush Types. Dimensions: 8410 x 1800mm
Reference: AH00O002
62 x 19 x 13 mm tip for forest shredders
Vercom Parts welding tip with tungsten carbide insert adaptable to AHWI fast mills. Dimensions:...
Reference: DOAK00O011
Carbide chip shielded hammer for fast mills
Vercom Parts hammer shielded with tungsten carbide chips for wood treatment adaptable to...
Reference: DOAK03O050
Adaptable 5-point hammer for light grinders
Vercom Parts fixed tool adaptable for lightweight shredder Doppstadt AK series Five tungsten...
Reference: DOAK03O055
5-point shielded hammer for high-speed grinders
Vercom Parts fixed tool adaptable for Doppstadt AK series shredder. Five tungsten carbide tips...
Reference: DOAK00S01
Adaptable hammer body for fast grinders
Adaptable tool Vercom Parts for fast shredders Doppstadt AK. One side sharp and the other covered...
Reference: DOAK03C04
Wide clamping wedge adaptable for Doppstadt type...
Vercom-Parts tool adaptable to Doppstatd high-speed shredders Tapping: 1 Weight: 1.18 Kg
Reference: WISR00O055
Screw hammer on support for fast grinders
Vercom Parts screw tool adaptable on Willibald SR series support. Top tool: 3 carbide tips...
Reference: WISR03O010
Adaptable lower hammer two tips for quick grinders
Vercom Parts lower tool in reinforced steel with two tungsten carbide tips adaptable to Willibald...
Reference: WIMZA03M1400P
Fixed hammer with carbide plate for fast mills
Vercom Parts fixed tool adaptable for Willibald fast shredders, MZA 1400 A carbide plate An M20...
Reference: TI365200O020
Adaptable hammer two tips in Hardox 400 for fast grinders
Vercom Parts hammer adaptable to TIM fast shredders 2 tips. 4 tungsten carbide inserts. In HARDOX...
Reference: HUFG03O005
Adaptable three-point tungsten carbide hammer for fast mills
Adaptable Vercom Parts fixed tool for Husmann FG series fast mills Three tungsten carbide tips...
Reference: WISHA03O0302
Hammer fixes two tips with reinforcement pads for fast...
Vercom Parts fixed hammer adaptable to Willibald Shark series fast mills. Two tungsten carbide...
Reference: WISR00R02
Willibald SR adaptable rotor tool scraper
Vercom Parts scraper adaptable to Willibald SR for right and left side installation of the...
Reference: DUHD1000S001
Hammer holder for Duratech HD10 grinders
Fixed hammer support body adaptable to Duratech HD10 fast shredder holders. With two threads for...
Reference: DOAK00PE04
Adaptable service plate for DOPPSTATD AK series shredders
Adaptable maintenance plate for Doppstatd type high-speed shredders. Dimension: 1750 x 90 x 20mm...
Reference: DOAK00PE01
Adaptable maintenance plate for Doppstatd AK430 shredders
Vercom-Parts HARDOX 450 maintenance plate suitable for Doppstatd high-speed shredders....
Reference: DOAK00OBEAK600
Doppstatd AK600 adaptable scraper floor strip
Vercom-Parts reinforced steel scraper bar adaptable to Doppstatd type slow shredders. Dimensions:...
Reference: DOAK00TC001
Hardox 450 sky sheet adaptable to fast shredders...
Vercom-Parts sky sheet adaptable to Doppstatd type high-speed shredders. Made of Hardox 450...
Reference: DOAK00PE02
HARDOX 450 service plate adaptable for Doppstatd type...
Vercom Parts maintenance plate adaptable to Doppstatd fast shredder types. Dimension: 1750 x 90 x...
Reference: DOAK00O0TF
HARDOX 450 bottom plate adaptable to Doppstatd type...
Vercom-Parts 450 abrasion resistant steel bottom plate adaptable to Doppstatd fast shredder type....
Reference: HU00O030
Adaptable four-point hammer for quick grinders
Vercom Parts fixed tools adaptable for Husmann HFG5 series fast shredders. Four tungsten carbide...
Reference: JEAZ00O030
Adaptable five-point carbide hammer for fast mills
Adaptable Vercom Parts fixed tool for Jenz fast grinders. Five carbide tips for green waste. A...
Reference: JEHE7004L03
108 x 60 x 7 mm adaptable blade for shredders
Vercom Parts blade adaptable to Jenz HEM 700 shredders. Dimension: 108 x 60 x 7 mm
Reference: NIC03O001
Adaptable hammer one tip with reinforcement pads for fast...
Adaptable Vercom Parts oscillating tool for Nicolas fast grinders. A tungsten carbide tip for...
Reference: DOAK03O010
Adaptable single-point hammer type Doppstatd high-speed...
Vercom Parts Adaptable Doppstadt Fast Mill Types. 1 Tungsten carbide tip Weight: 2.25 Kg
Reference: JEAZ06M12
Adaptable floating hammer for Jenz fast shredders
Adaptable vercom parts oscillating tool for Jenz refiner series AZ60, AZ65, AZ960 and other...
Reference: WISHA10R04
Adaptable side scraper for Willibald Shark quick shredders
Vercom Parts side scraper adaptable to Willibald Shark shredders. Dimension: 305 x 100 x 20 mm...
Reference: WISHA10R03
Adaptable central scraper for Willibald Shark rapid...
Vercom Parts central scraper adaptable to Willibald Shark series shredders. Dimensions: 425 x 100...
Reference: JEAZ00O040
Refilled hammer adaptable to Jenz fast shredders
Adaptable fixed tool for Jenz shredder. With carbide chip refilling. A hole Ø 20 mm. Weight :...
Reference: WIMZA00M010
Adaptable tungsten chip shielded oscillating hammer...
Vercom Parts oscillating tool adaptable to Willibald MZA shredders. Model with carbide chip...
Reference: TI365200O010
Adaptable armoured fixed hammer for TIM fast shredders
Adaptable Vercom Parts fixed tool for TIM shredders. Carbide chip shielding. Two M20 taps for...
Reference: JEAZ00S003
Adaptable hammer and blade holder for Jenz grinders
Oscillating body hammer support & blade adaptable on Jenz grinders. Axis: 35mm. With ring and...
Reference: JEAZ03L002
Blade with reloading for Jenz fast shredders
Adaptable blade for Jenz mill with tungsten carbide chip coating. Dimensions: 100 x 70 x 12 mm....
Reference: JEAZ03C04
Blocking wedge with reloading adaptable to Jenz fast...
Cale Vercom Parts adaptable to Jenz fast shredders. Weight : 1.60 kg
Reference: JEHEV7004L03
Blade for adaptable fast shredders Jenz HEM 700
Vercom Parts blade adaptable to Jenz HEM 700 shredder. Dimensions: 108 x 60 x 7 mm Weight : 0.32 kg
Reference: JEAZ08O020
Four-point hammer for Jenz series AZ fast grinders
Fixed hammer adaptable for Jenz series AZ shredder. Four tungsten carbide tips for green waste. A...
Reference: WISHA10R02
Reversible scraper for shredders Willibald MZA
Vercom Parts scraper adaptable to MZA shredders model Shark, left and right tool. Dimensions: 305...
Reference: doak00O0TB
Adaptable rear grate cover type Doppstatd rapid shredders
Rear grate cover adaptable to Doppstatd type shredders fast series. Dimensions: 1750 x 1260 mm....
Reference: JEAZ06O040
Fixed reloaded adaptable hammer for Jenz high-speed...
Vercom Parts fixed tool adaptable to Jenz shredders. A hole Ø 20 mm. Reloading to the copals on...
Reference: JEAZ03C01
Adaptable wedge for Jenz fast grinders
Adaptable wedge for Jenz shredders Two ø35 drills. Weight : 1.6 kg
Reference: DOAK00O011
Adaptable tungsten carbide shielded hammer for Doppstatd...
Tungsten carbide chip shielded hammer for wood processing. Weight : 3.45 kg
Reference: WISHA10R01
Central scraper for fast grinders Willibald Shark
Vercom Parts central scraper adaptable to Willibald Shark shredders.
Reference: DUHD1003M025
Duratech HD10 Reinforced Oscillating Hammer
Oscillating hammer adaptable HD10 mill reinforced with carbide chips. Weight : 3.32 Kg
Reference: doak11ba01
Carpet with metal structure for rear conveyor AK 430 of...
Carpet with metal structure of 8410 x 1750mm.
Reference: DUHD1003M021
Oscillating hammer adaptable to Duratech HD10 shredders
Oscillating hammer with 2 brazed tungsten carbide inserts adaptable to Duratech HD10 series...
Reference: DODW113060AR
Doppstatd DW3060 Adaptable Rear Reject Mat
DW3060 11.200 x 1200mm endless +T30/10 +T20/10 Hot junction. Cleat T30/10 S B. Spacing between...
Reference: WISR03O011
Adaptable anti-abrasion fixed hammer Willibald SR
Adaptable fixed tool for Willibald SR grinder. Anti abrasion reloading all around for wood. An...
Reference: ME08011
Adaptable hammers for METALIC shredder
Hammers/flail adaptable for Metallic fast grinder. Drilling ø40.5Weight : 6.3 KG
Reference: WIMZA03M022D
Right and left adaptable floating hammer for fast grinders
Vercom Parts straight floating hammer adaptable on Willibald MZA fast shredders. A tip + a...
