Reference: WIMZA00P001
360 mm tempered blade for fast grinders
Vercom Parts counter blade in HARDOX 450 (rotor comb) adaptable to Willibald MZA series fast...
Reference: DOAK00G250
Complete grid for fast grinders in Hardox 500
Complete Vercom Parts 250 mm grille adaptable Doppstadt AK series. Size: 1245 x 1765 cm Thickness...
Reference: ROG03O152
Adaptable tine for FSI, Carlton and Bandit stump trimmers
Vercom Parts fixed tool adaptable for strain trimmer FSI, Carlton, Bandit
Reference: WIMZA03M022D
Right and left adaptable floating hammer for fast grinders
Vercom Parts straight floating hammer adaptable on Willibald MZA fast shredders. A tip + a...
Reference: WIMZA03M1400P
Fixed hammer with carbide plate for fast mills
Vercom Parts fixed tool adaptable for Willibald fast shredders, MZA 1400 A carbide plate An M20...
Reference: DOSM500TR5O6
Trommel with adaptable welded drive chain type Doppstatd
Vercom Parts trommel adaptable to Doppstatd type trommel screeners. Available in mesh sizes from...
Reference: WIMZA00A001
Adaptable 35/1450 mm shaft for Willibald high-speed...
Vercom-Parts treated steel shaft adaptable to Willibald high-speed shredders. Dimensions: 35/1450 mm
Reference: WIMZA00P003
Counter blade with carbide inserts for fast grinders
Vercom Parts hardened steel scraper (rotor comb) adaptable for Willibald MZA fast shredder...
Reference: DOAK00S01
Adaptable hammer body for fast grinders
Adaptable tool Vercom Parts for fast shredders Doppstadt AK. One side sharp and the other covered...
Reference: DOAK12BM01
Carpet with metal structure for adaptable rear conveyor...
Vercom Parts Rear Metal Mat Adaptable Doppstatd Fast Crush Types. Dimensions: 8410 x 1800mm
Reference: DOAK00A01
Adaptable hammer pins for DOPPSTATD high-speed mills
Vercom Parts Adaptable Doppstatd Hammer Shafts Types. Dimensions: 1730 x 50 x M22 x 1.5 mm. For...
Reference: DOAK12BA01
Carpet with metal structure for rear conveyor 430 x 8410...
Vercom Parts rear mat adaptable to Doppstadt AK series fast shredders. Dimensions: 430 x 8410 x...
Reference: DODH04S01
Adaptable blade holder for Doppstatd shredders
Vercom Parts Adaptable Blade Stand Shredders Type Doppstatd. Dimension: 220 x 230 x 101mm
Reference: KOMU13-TR10O8
Trommel adaptable for screens
Replacement trommel adaptable for the following screeners: Komptech; Doppstatd; Terra Select;...
Reference: WISR03O010
Adaptable lower hammer two tips for quick grinders
Vercom Parts lower tool in reinforced steel with two tungsten carbide tips adaptable to Willibald...
Reference: DOAK00O011
Carbide chip shielded hammer for fast mills
Vercom Parts hammer shielded with tungsten carbide chips for wood treatment adaptable to...
Reference: SE00O061
Hammer a reinforced tip for stone grinders Seppi
Vercom Parts tool adaptable to Seppi stone grinders. A big spike. 4 reinforcement pads. Weight :...
Reference: DOAK03O050
Adaptable 5-point hammer for light grinders
Vercom Parts fixed tool adaptable for lightweight shredder Doppstadt AK series Five tungsten...
Reference: DOAK03O055
5-point shielded hammer for high-speed grinders
Vercom Parts fixed tool adaptable for Doppstadt AK series shredder. Five tungsten carbide tips...
Reference: VAL06O02
Reinforced hammer adaptable to Valentini stone grinders
Adaptable tool for Valentini grinder. A tungsten carbide tip for the stone. Two tungsten carbide...
Reference: WIMZA06M022G
Floating hammer a tip adaptable to Willibald MZA shredders
Vercom Parts floating hammer adaptable to Willibald MZA fast shredders. 1 tip. 1 tungsten...
Reference: WISR00O055
Screw hammer on support for fast grinders
Vercom Parts screw tool adaptable on Willibald SR series support. Top tool: 3 carbide tips...
Reference: DODW00P010
Armoured triangular threw for slow grinders
Vercom-Parts fixed triangular tine counter suitable for Doppstatd type slow shredders. 20kg...
Reference: DOAK03C04
Wide clamping wedge adaptable for Doppstadt type...
Vercom-Parts tool adaptable to Doppstatd high-speed shredders Tapping: 1 Weight: 1.18 Kg
Reference: FSI04L004
Blade adaptable to FSI shredders
Vercom Parts tools adaptable to FSI shredders. Dimensions: 279x125x12mm
Reference: WISHA03O0302
Hammer fixes two tips with reinforcement pads for fast...
Vercom Parts fixed hammer adaptable to Willibald Shark series fast mills. Two tungsten carbide...
Reference: WISR00R02
Willibald SR adaptable rotor tool scraper
Vercom Parts scraper adaptable to Willibald SR for right and left side installation of the...
Reference: DOAK00PE04
Adaptable service plate for DOPPSTATD AK series shredders
Adaptable maintenance plate for Doppstatd type high-speed shredders. Dimension: 1750 x 90 x 20mm...
Reference: DOAK00PE01
Adaptable maintenance plate for Doppstatd AK430 shredders
Vercom-Parts HARDOX 450 maintenance plate suitable for Doppstatd high-speed shredders....
Reference: SE03O010
Oscillating hammer with reinforcements for forestry mills
Adaptable Vercom Parts oscillating tool for Seppi forest shredders. Tool with tungsten carbide...
Reference: DOAK00OBEAK600
Doppstatd AK600 adaptable scraper floor strip
Vercom-Parts reinforced steel scraper bar adaptable to Doppstatd type slow shredders. Dimensions:...
Reference: SE03O040
Reversible hammer with shielding for forest shredders
Adaptable Vercom Parts oscillating tool for Seppi forest shredders Underneath and on the sides...
Reference: DOAK00TC001
Hardox 450 sky sheet adaptable to fast shredders...
Vercom-Parts sky sheet adaptable to Doppstatd type high-speed shredders. Made of Hardox 450...
Reference: DOAK00PE02
HARDOX 450 service plate adaptable for Doppstatd type...
Vercom Parts maintenance plate adaptable to Doppstatd fast shredder types. Dimension: 1750 x 90 x...
Reference: DODW112560SR
Adaptable reinforced sub-rotor belts type Doppstatd...
Reinforced rotor mat (metal structure) 500/3+1ST 5+2, 7450 x 1000 mm Profile G85-L17 with...
Reference: DOAK00O0TF
HARDOX 450 bottom plate adaptable to Doppstatd type...
Vercom-Parts 450 abrasion resistant steel bottom plate adaptable to Doppstatd fast shredder type....
Reference: NIC03O001
Adaptable hammer one tip with reinforcement pads for fast...
Adaptable Vercom Parts oscillating tool for Nicolas fast grinders. A tungsten carbide tip for...
Reference: DOAK03O010
Adaptable single-point hammer type Doppstatd high-speed...
Vercom Parts Adaptable Doppstadt Fast Mill Types. 1 Tungsten carbide tip Weight: 2.25 Kg
Reference: WISHA10R04
Adaptable side scraper for Willibald Shark quick shredders
Vercom Parts side scraper adaptable to Willibald Shark shredders. Dimension: 305 x 100 x 20 mm...
Reference: WISHA10R03
Adaptable central scraper for Willibald Shark rapid...
Vercom Parts central scraper adaptable to Willibald Shark series shredders. Dimensions: 425 x 100...
Reference: SE00O035
Fixed hammer adaptable to Seppi forestry shredders
Vercom Parts fixed hammer suitable for Seppi shredders. 2 large carbide tips. 1 small insert...
Reference: WIMZA00M010
Adaptable tungsten chip shielded oscillating hammer...
Vercom Parts oscillating tool adaptable to Willibald MZA shredders. Model with carbide chip...
Reference: SE00O80
Three-point hammer adaptable to Seppi forest shredders
Adaptable Vercom Parts tool for Seppi shredder. Three tungsten carbide tips. Total height 105 mm...
Reference: SE06O050
Two-point hammer adaptable to Seppi shredders
Adaptable Vercom Parts fixed tool for Seppi grinders. Two tungsten carbide tips for green waste....
Reference: WISHA10R02
Reversible scraper for shredders Willibald MZA
Vercom Parts scraper adaptable to MZA shredders model Shark, left and right tool. Dimensions: 305...
Reference: doak00O0TB
Adaptable rear grate cover type Doppstatd rapid shredders
Rear grate cover adaptable to Doppstatd type shredders fast series. Dimensions: 1750 x 1260 mm....
Reference: DOAK00O011
Adaptable tungsten carbide shielded hammer for Doppstatd...
Tungsten carbide chip shielded hammer for wood processing. Weight : 3.45 kg
Reference: WISHA10R01
Central scraper for fast grinders Willibald Shark
Vercom Parts central scraper adaptable to Willibald Shark shredders.
Reference: doak11ba01
Carpet with metal structure for rear conveyor AK 430 of...
Carpet with metal structure of 8410 x 1750mm.
Reference: DODW113060AR
Doppstatd DW3060 Adaptable Rear Reject Mat
DW3060 11.200 x 1200mm endless +T30/10 +T20/10 Hot junction. Cleat T30/10 S B. Spacing between...
Reference: WISR03O011
Adaptable anti-abrasion fixed hammer Willibald SR
Adaptable fixed tool for Willibald SR grinder. Anti abrasion reloading all around for wood. An...
Reference: MADAPTMDB03
Adaptable two-point hammer MDB FSI|NIUBO
Discover our 2-point hammer adaptable to MDB type F300 Green Climber, LV 300 PRO Green Climber,...
