Reference: DOAK00G250
Complete grid for fast grinders in Hardox 500
Complete Vercom Parts 250 mm grille adaptable Doppstadt AK series. Size: 1245 x 1765 cm Thickness...
Reference: DOSM500TR5O6
Trommel with adaptable welded drive chain type Doppstatd
Vercom Parts trommel adaptable to Doppstatd type trommel screeners. Available in mesh sizes from...
Reference: DOAK00S01
Adaptable hammer body for fast grinders
Adaptable tool Vercom Parts for fast shredders Doppstadt AK. One side sharp and the other covered...
Reference: DOAK12BM01
Carpet with metal structure for adaptable rear conveyor...
Vercom Parts Rear Metal Mat Adaptable Doppstatd Fast Crush Types. Dimensions: 8410 x 1800mm
Reference: DOAK00A01
Adaptable hammer pins for DOPPSTATD high-speed mills
Vercom Parts Adaptable Doppstatd Hammer Shafts Types. Dimensions: 1730 x 50 x M22 x 1.5 mm. For...
Reference: ALBSI04L02
200 x 225 x 18 mm blade suitable for ALBACH chippers
Vercom Parts blade adaptable for Albach shredders. Dimensions: 200 x225 x18 mm Cutting angle 28°...
Reference: BU03O03P
Three-point adaptable hammer with reinforcements for...
Vercom Parts fixed tool adaptable to the type of Bugnot stone crushers. Three tungsten carbide...
Reference: BU03O08P
Reinforced fixed hammer adaptable to Bugnot stone crushers
Vercom Parts fixed tool adaptable to Bugnot stone grinders. Two large spikes spread out in...
Reference: DOAK12BA01
Carpet with metal structure for rear conveyor 430 x 8410...
Vercom Parts rear mat adaptable to Doppstadt AK series fast shredders. Dimensions: 430 x 8410 x...
Reference: GREEN04L01
228 x 130 x 15 mm blade adaptable for Greentec shredders
Vercom Parts blade adaptable to Greentec shredders. Dimensions: 228 x 130 x 15 mm Made of...
Reference: DODH04S01
Adaptable blade holder for Doppstatd shredders
Vercom Parts Adaptable Blade Stand Shredders Type Doppstatd. Dimension: 220 x 230 x 101mm
Reference: KOMU13-TR10O8
Trommel adaptable for screens
Replacement trommel adaptable for the following screeners: Komptech; Doppstatd; Terra Select;...
Reference: BU03O05P
Reinforced two-point adaptable hammer for Bugnot stone...
Adaptable fixed tool for Bugnot grinder. Two large tight tungsten carbide tips for stone. Below...
Reference: DOAK00O011
Carbide chip shielded hammer for fast mills
Vercom Parts hammer shielded with tungsten carbide chips for wood treatment adaptable to...
Reference: DOAK03O050
Adaptable 5-point hammer for light grinders
Vercom Parts fixed tool adaptable for lightweight shredder Doppstadt AK series Five tungsten...
Reference: DOAK03O055
5-point shielded hammer for high-speed grinders
Vercom Parts fixed tool adaptable for Doppstadt AK series shredder. Five tungsten carbide tips...
Reference: DODW00P010
Armoured triangular threw for slow grinders
Vercom-Parts fixed triangular tine counter suitable for Doppstatd type slow shredders. 20kg...
Reference: DOAK03C04
Wide clamping wedge adaptable for Doppstadt type...
Vercom-Parts tool adaptable to Doppstatd high-speed shredders Tapping: 1 Weight: 1.18 Kg
Reference: MUS04L02C
Adaptable blade for MUS-MAX crusher of 168 x 235 x 20 mm
Blade for MUS-MAX grinders. Dimensions: 168 x 235 x 20 mm.
Reference: DUHD1000S001
Hammer holder for Duratech HD10 grinders
Fixed hammer support body adaptable to Duratech HD10 fast shredder holders. With two threads for...
Reference: BU03O10D
Adaptable hammers Bugnot TYPE F special green waste
Left and right hammers for wood and green waste adaptable to bugnot shredders. 3 tungsten carbide...
Reference: DOAK00PE04
Adaptable service plate for DOPPSTATD AK series shredders
Adaptable maintenance plate for Doppstatd type high-speed shredders. Dimension: 1750 x 90 x 20mm...
Reference: DOAK00PE01
Adaptable maintenance plate for Doppstatd AK430 shredders
Vercom-Parts HARDOX 450 maintenance plate suitable for Doppstatd high-speed shredders....
Reference: DOAK00OBEAK600
Doppstatd AK600 adaptable scraper floor strip
Vercom-Parts reinforced steel scraper bar adaptable to Doppstatd type slow shredders. Dimensions:...
Reference: DOAK00TC001
Hardox 450 sky sheet adaptable to fast shredders...
Vercom-Parts sky sheet adaptable to Doppstatd type high-speed shredders. Made of Hardox 450...
Reference: DOAK00PE02
HARDOX 450 service plate adaptable for Doppstatd type...
Vercom Parts maintenance plate adaptable to Doppstatd fast shredder types. Dimension: 1750 x 90 x...
Reference: DODW112560SR
Adaptable reinforced sub-rotor belts type Doppstatd...
Reinforced rotor mat (metal structure) 500/3+1ST 5+2, 7450 x 1000 mm Profile G85-L17 with...
Reference: DOAK00O0TF
HARDOX 450 bottom plate adaptable to Doppstatd type...
Vercom-Parts 450 abrasion resistant steel bottom plate adaptable to Doppstatd fast shredder type....
Reference: NIC03O001
Adaptable hammer one tip with reinforcement pads for fast...
Adaptable Vercom Parts oscillating tool for Nicolas fast grinders. A tungsten carbide tip for...
Reference: DOAK03O010
Adaptable single-point hammer type Doppstatd high-speed...
Vercom Parts Adaptable Doppstadt Fast Mill Types. 1 Tungsten carbide tip Weight: 2.25 Kg
Reference: doak00O0TB
Adaptable rear grate cover type Doppstatd rapid shredders
Rear grate cover adaptable to Doppstatd type shredders fast series. Dimensions: 1750 x 1260 mm....
Reference: DOAK00O011
Adaptable tungsten carbide shielded hammer for Doppstatd...
Tungsten carbide chip shielded hammer for wood processing. Weight : 3.45 kg
Reference: DUHD1003M025
Duratech HD10 Reinforced Oscillating Hammer
Oscillating hammer adaptable HD10 mill reinforced with carbide chips. Weight : 3.32 Kg
Reference: doak11ba01
Carpet with metal structure for rear conveyor AK 430 of...
Carpet with metal structure of 8410 x 1750mm.
Reference: DUHD1003M021
Oscillating hammer adaptable to Duratech HD10 shredders
Oscillating hammer with 2 brazed tungsten carbide inserts adaptable to Duratech HD10 series...
Reference: BU03O20D
Hammer an adaptable tip Bugnot type SPD - SPG
Left and right hammer a tip type SPD - SPG adaptable to stone crushers and forest BUGNOT.
Reference: DODW113060AR
Doppstatd DW3060 Adaptable Rear Reject Mat
DW3060 11.200 x 1200mm endless +T30/10 +T20/10 Hot junction. Cleat T30/10 S B. Spacing between...
